Industrial equipment and test instruments, imported and supplied from Rawalpindi. Air and gas compressors, air dryers and filtration, pressure vessels, material handling equipment, dust and fume extraction, vacuum pumps, blowers, on-site nitrogen and oxygen plants, industrial pumps, HVAC systems, spare parts – and the full range of test and measurement instruments – with our own customs, freight and delivery chain behind every order.
Pricing is quoted on request. Tell us the model or duty and the quantity, and we will come back with a landed price including duty and delivery.
Diesel counterbalance forklift for yards, ports and outdoor loading, where run time matters more than emissions and a battery would need charging mid-shift.
Battery electric forklift that runs clean and quiet enough for indoor warehouses, food plants and any floor where exhaust fumes are a problem.
Narrow-aisle reach truck with a mast that extends forward to place pallets in high racking, letting a warehouse store more in the same floor area.
Walk-behind electric stacker that lifts and moves pallets without the cost or floor space of a full forklift - the usual answer for a small warehouse.
Hand-pumped hydraulic stacker for lifting pallets onto racking or up to work height where there is no power supply and volumes do not justify an electric unit.
The basic hydraulic pallet truck every store floor needs - two forks, a pump handle and enough capacity to move a loaded pallet by hand.
Continuous-duty rotary screw compressor for plants that need steady compressed air all shift, supplied oil-injected or oil-free across a wide range of drive powers.
VSD screw compressor that matches motor speed to actual air demand, cutting the energy a fixed-speed machine burns every time the plant runs below full load.
Belt-driven piston compressor with a mounted air receiver, built for workshops, service bays and light production where air is used in bursts rather than continuously.
Trailer-mounted diesel compressor that takes compressed air to sites with no mains power - road works, drilling, sandblasting and pipeline construction.
High-pressure breathing air compressor for filling SCBA and diving cylinders, with a purification train that brings air up to breathable purity standards.
Booster that takes existing plant air at 6-10 bar and raises it to 40 bar and beyond for PET blow moulding, leak testing and high-pressure process work.
Class 0 oil-free compressor for processes where even trace oil carry-over is unacceptable - pharmaceutical, food, electronics and medical air.
Compressor built to handle nitrogen without contaminating it, used to boost N2 from a generator into storage or a cylinder filling bank.
Oil-free oxygen compressor built from oxygen-compatible materials throughout, so there is no hydrocarbon anywhere in the gas path.
Sealed helium compressor built to hold on to a gas that escapes through joints an ordinary compressor would get away with, for recovery and cylinder filling.
CO2 compressor sized for beverage, fire-suppression and food-grade carbon dioxide duty, handling a gas that turns liquid as it is compressed.
Ammonia compressor for industrial refrigeration and process duty, built from materials that stand up to NH3 without the copper that ammonia attacks.
Natural gas compressor for CNG filling stations and in-plant gas boosting, taking low pressure pipeline gas up to vehicle storage pressure.
Refrigerated dryer that chills compressed air to condense the water out of it, protecting tools, cylinders and pneumatic controls from rust and slugs of condensate.
Twin-tower desiccant dryer that takes compressed air to a dew point a refrigerated unit cannot reach, for instrument air, outdoor lines and cold-climate installations.
Staged inline filters that strip particulate, aerosol oil and oil vapour out of compressed air, each stage rated for what the one before it leaves behind.
Separator that splits compressor condensate into clean water and captured oil, so the drain from the compressor room does not become an environmental problem.
Mild or carbon steel air receiver that buffers compressor output, steadies line pressure and drops out condensate before the air reaches the plant.
SS304 or SS316 pressure vessel fabricated to your drawing for food, pharmaceutical and chemical duty, where mild steel would contaminate the product.
Cartridge or bag-type dust collector that pulls airborne dust out of a production area and pulse-cleans its own filters, so suction does not fade through the shift.
Fume extractor with an articulated arm that captures welding smoke at the torch, before it reaches the welder's breathing zone or the roof of the shop.
Mist collector that clears the oil and coolant haze thrown off by CNC machines and grinders, keeping it off the floor, off the machine and out of the operator's lungs.
A complete de-dusting installation - hoods, round ductwork, collector, fan and controls - designed, fabricated and commissioned as one project rather than bought piece by piece.
SS304 or SS316 bag filter housing for bulk liquid filtration, where a filter bag holds far more dirt before changeout than a cartridge of the same size.
SS cartridge housing for fine and sterile filtration of water, steam, air and process gases, with sanitary connections for food and pharmaceutical lines.
Oil-sealed rotary vane pump, the general-purpose workhorse for packaging, laboratory and handling duty where a deep and steady vacuum is needed.
Liquid ring pump that uses a rotating ring of water to make vacuum, so it can swallow wet, dirty and vapour-laden gas that would wreck a dry pump.
Contact-free claw pump that produces vacuum with no oil in the pumping chamber, so there is no oil to change and nothing to contaminate the process.
Regenerative side channel blower that moves a large air volume at moderate pressure or vacuum, running oil-free with a single moving part.
Twin-lobe roots blower that delivers a constant air volume regardless of back pressure, the standard choice for effluent aeration and pneumatic conveying.
High-speed centrifugal turbo blower for large continuous air volumes, delivering oil-free air at a fraction of the energy a roots blower needs for the same duty.
PSA nitrogen plant that makes its own N2 from compressed air on your site, replacing cylinder deliveries and the price per cylinder that comes with them.
PSA oxygen plant producing medical or industrial grade O2 continuously from air, so a hospital or plant is not dependent on cylinder logistics.
Filling station that boosts generated nitrogen or oxygen to cylinder pressure and charges a bank of cylinders, turning an on-site plant into its own gas supply.
Standard end suction centrifugal pump for general water transfer - the pump most plants use for boosting, circulation and supply duty.
Pump built for water well above boiling point, with seals, bearings and materials that survive a temperature at which an ordinary water pump would fail.
Corrosion-resistant process pump for acids, solvents and aggressive chemicals, specified in the material your particular fluid will not eat through.
Central chilled water plant - chiller, pumps, headers and controls - sized and installed as one system for building comfort cooling or process duty.
Air handling unit built to your airflow and filtration specification, with the coil, fan and filter stages the space actually needs rather than a fixed catalogue model.
Fabricated and installed GI ducting in square or round section, with the fittings, dampers and insulation that make a duct run actually deliver its design airflow.
Genuine and replacement compressor spares - air and oil filters, separators, valves, kits and elements - matched to your machine from its model and serial number.
Mineral and synthetic compressor oils in the grade your machine's service schedule calls for, plus the vacuum pump and gear oils that go with the rest of the room.
Replacement filter elements, desiccant charges, drain valves and service kits for refrigerated and desiccant dryers and inline compressed air filtration.
Vanes, seals, bearings, filters and overhaul kits for vacuum pumps and blowers, plus the rebuild work itself when the pump is worth repairing rather than replacing.
Network and telephone cable tester for verifying continuity, wiring order and faults on RJ45 and RJ11 runs during installation and fault-finding.
Cable tracer and tone generator kit for locating buried or concealed runs, identifying pairs in a bundle and finding breaks in network and telecom cable.
True RMS clamp meter reading both AC and DC current, giving accurate results on the distorted waveforms produced by VFDs, inverters and switching loads.
Power clamp meter measuring true power, power factor and energy alongside current and voltage, for load surveys and energy audits.
Three-phase power clamp meter reading kW, kVA, kVAr, kWh and power factor with RS-232 output and memory - built for energy audits on three-phase supplies.
Compact clamp meter resolving down to milliamps on AC and DC, suited to control circuits, 4-20 mA instrument loops and leakage checks.
Digital clamp meter reading AC and DC current without breaking the circuit, with voltage, resistance and continuity ranges via the test leads.
Tweezer-style SMD tester that auto-detects resistance, capacitance and diodes, so surface-mount parts can be checked in place without a bench setup.
Bench LCR bridge measuring inductance, capacitance and resistance with a USB interface for logging results to a PC.
Bench-style digital LCR meter for measuring inductance, capacitance and resistance on components and small assemblies.
Dedicated digital capacitance meter with a zero-adjust control, for checking motor-run capacitors, power-factor banks and electronic components.
Safety-rated digital multimeter built for industrial installation work, carrying a CAT IV 600 V / CAT III 1000 V rating with third-party certification.
Five instruments in one: a full auto-ranging multimeter plus sound level, light, humidity and temperature measurement in a single handheld body.
General-purpose digital multimeter for AC/DC voltage, current, resistance and continuity work on panels, machines and installations.
Compact pocket digital multimeter for everyday voltage, resistance and continuity checks by electricians and maintenance technicians.
Full-function digital multimeter measuring to AC 750 V / DC 1000 V and 10 A, with capacitance, inductance, frequency, temperature, hFE and diode ranges.
True RMS digital multimeter for installation and panel work where distorted waveforms would mislead an averaging meter.
Auto-ranging digital multimeter with a bright display, built for electricians moving quickly between voltage, resistance and continuity checks.
Auto-ranging digital multimeter in the MS8239 family, specified for general electrical maintenance and workshop use.
Industrial-grade digital multimeter rated CAT IV 600 V / CAT III 1000 V and ETL listed, for switchboard and distribution work.
True RMS digital multimeter with a large backlit display, aimed at maintenance teams working on drives, UPS systems and electronic loads.
True RMS digital multimeter with a high-contrast display, specified for industrial maintenance where accuracy on distorted waveforms matters.
Handheld laser distance meter reading up to 40 metres, with area and volume calculation for surveys, site take-offs and fit-out work.
Contact-type digital tachometer for shaft and roller speed checks, using a wheel adaptor for surface-speed readings on running machinery.
Non-contact laser tachometer for reading shaft and rotor speed from a safe distance, with data hold, max/min and a backlit display.
Laser distance meter reading up to 60 metres with area and volume functions, for larger surveys, warehouse take-offs and site set-out.
Insulation tester covering 50 V to 1000 V test voltages up to 100 G-ohm, with DAR and PI ratios and onboard memory for recorded results.
Digital insulation resistance tester (megger) for commissioning and periodic testing of cables, motors, transformers and switchgear.
Phase sequence and motor rotation indicator for confirming three-phase supply order before energising motors, drives and switchboards.
Pen-style non-contact voltage detector with a metal-detection mode, for safe live-circuit checks and tracing conductors behind finishes.
Digital insulation resistance tester for routine and acceptance testing of cables, windings and installations, with a digital readout in place of an analogue scale.
Earth resistance tester kit with spikes, leads and carry case, for verifying earth electrode and grounding system resistance during commissioning and audits.
Process calibrator sourcing and measuring 0-100 mV, 0-10 V and 0-24 mA, for commissioning and checking transmitters, controllers and 4-20 mA loops.
Four-in-one environmental tester with tripod mount, combining sound level, light, humidity and temperature measurement with data hold and max/min logging.
Digital sound level meter for workplace noise surveys, plant-room readings and environmental noise compliance checks.
Handheld sound level meter with a large display for spot noise readings in factories, generator rooms and around construction sites.
Vane-type digital anemometer for air velocity and airflow measurement on HVAC systems, ducts, extraction fans and ventilation commissioning.
Flexible-probe combustible gas detector for leak location on natural gas, LPG and fuel lines, with visual and audible alarm as concentration rises.
Sound level meter for environmental and occupational noise monitoring, with a windshield and carry case for outdoor survey work.
Digital lux meter with a corded remote sensor, for verifying workplace lighting levels against specification in offices, factories and warehouses.
Compact digital sound level meter for spot noise checks where a full survey instrument would be more than the job needs.
Lux meter with an integrated dome sensor and rotating head, for lighting design verification and workplace illumination compliance.
Vane anemometer for air velocity and volume measurement, suited to ventilation balancing and duct commissioning on larger HVAC installations.
Vane anemometer for air velocity and temperature readings, with the ranges and resolution needed for routine HVAC and ventilation checks.
Compact lux meter with a rotating sensor head, for quick illumination readings during lighting installation and handover checks.
Pin-type digital moisture meter for reading moisture content in timber, plaster, drywall and building materials before finishing or installation.
Moisture tester aimed at timber and wood products, giving a fast pin reading so stock can be checked before machining, joinery or installation.
Infrared thermometer gun reading -40 C to 800 C without contact - built for motors, bearings, switchgear, furnaces and process pipework.
Probe-type digital thermometer for contact temperature measurement on surfaces, liquids and air using a thermocouple input.
Laser-targeted infrared thermometer covering -20 C to 500 C, sized for HVAC, electrical maintenance and general plant temperature checks.
Non-contact infrared thermometer for quick, repeatable temperature readings on equipment that is running, hot or otherwise unsafe to touch.
Combined temperature and humidity meter with a dual display, for HVAC commissioning, store rooms, server rooms and production areas.
The catalogue is a sample of what we supply. Send us the equipment, the duty or the model number you need and we will source and quote it.