MASTECH test and measurement instruments, imported and supplied from Rawalpindi. Digital multimeters, clamp meters, insulation and earth testers, infrared thermometers, anemometers, light and sound meters, moisture meters and component testers – with our own customs, freight and delivery chain behind every order.
Pricing is quoted on request. Tell us the model and quantity and we will come back with a landed price including duty and delivery.
Tweezer-style SMD tester that auto-detects resistance, capacitance and diodes, so surface-mount parts can be checked in place without a bench setup.
Infrared thermometer gun reading -40 C to 800 C without contact - built for motors, bearings, switchgear, furnaces and process pipework.
Safety-rated digital multimeter built for industrial installation work, carrying a CAT IV 600 V / CAT III 1000 V rating with third-party certification.
Five instruments in one: a full auto-ranging multimeter plus sound level, light, humidity and temperature measurement in a single handheld body.
True RMS clamp meter reading both AC and DC current, giving accurate results on the distorted waveforms produced by VFDs, inverters and switching loads.
Four-in-one environmental tester with tripod mount, combining sound level, light, humidity and temperature measurement with data hold and max/min logging.
Bench LCR bridge measuring inductance, capacitance and resistance with a USB interface for logging results to a PC.
Insulation tester covering 50 V to 1000 V test voltages up to 100 G-ohm, with DAR and PI ratios and onboard memory for recorded results.
Power clamp meter measuring true power, power factor and energy alongside current and voltage, for load surveys and energy audits.
Three-phase power clamp meter reading kW, kVA, kVAr, kWh and power factor with RS-232 output and memory - built for energy audits on three-phase supplies.
Handheld laser distance meter reading up to 40 metres, with area and volume calculation for surveys, site take-offs and fit-out work.
Contact-type digital tachometer for shaft and roller speed checks, using a wheel adaptor for surface-speed readings on running machinery.
Bench-style digital LCR meter for measuring inductance, capacitance and resistance on components and small assemblies.
Network and telephone cable tester for verifying continuity, wiring order and faults on RJ45 and RJ11 runs during installation and fault-finding.
Digital insulation resistance tester (megger) for commissioning and periodic testing of cables, motors, transformers and switchgear.
Phase sequence and motor rotation indicator for confirming three-phase supply order before energising motors, drives and switchboards.
Non-contact laser tachometer for reading shaft and rotor speed from a safe distance, with data hold, max/min and a backlit display.
General-purpose digital multimeter for AC/DC voltage, current, resistance and continuity work on panels, machines and installations.
Digital sound level meter for workplace noise surveys, plant-room readings and environmental noise compliance checks.
Dedicated digital capacitance meter with a zero-adjust control, for checking motor-run capacitors, power-factor banks and electronic components.
Compact clamp meter resolving down to milliamps on AC and DC, suited to control circuits, 4-20 mA instrument loops and leakage checks.
Cable tracer and tone generator kit for locating buried or concealed runs, identifying pairs in a bundle and finding breaks in network and telecom cable.
Probe-type digital thermometer for contact temperature measurement on surfaces, liquids and air using a thermocouple input.
Pen-style non-contact voltage detector with a metal-detection mode, for safe live-circuit checks and tracing conductors behind finishes.
Handheld sound level meter with a large display for spot noise readings in factories, generator rooms and around construction sites.
Vane-type digital anemometer for air velocity and airflow measurement on HVAC systems, ducts, extraction fans and ventilation commissioning.
Flexible-probe combustible gas detector for leak location on natural gas, LPG and fuel lines, with visual and audible alarm as concentration rises.
Compact pocket digital multimeter for everyday voltage, resistance and continuity checks by electricians and maintenance technicians.
Full-function digital multimeter measuring to AC 750 V / DC 1000 V and 10 A, with capacitance, inductance, frequency, temperature, hFE and diode ranges.
Laser-targeted infrared thermometer covering -20 C to 500 C, sized for HVAC, electrical maintenance and general plant temperature checks.
Pin-type digital moisture meter for reading moisture content in timber, plaster, drywall and building materials before finishing or installation.
Sound level meter for environmental and occupational noise monitoring, with a windshield and carry case for outdoor survey work.
Digital lux meter with a corded remote sensor, for verifying workplace lighting levels against specification in offices, factories and warehouses.
Moisture tester aimed at timber and wood products, giving a fast pin reading so stock can be checked before machining, joinery or installation.
Non-contact infrared thermometer for quick, repeatable temperature readings on equipment that is running, hot or otherwise unsafe to touch.
True RMS digital multimeter for installation and panel work where distorted waveforms would mislead an averaging meter.
Auto-ranging digital multimeter with a bright display, built for electricians moving quickly between voltage, resistance and continuity checks.
Auto-ranging digital multimeter in the MS8239 family, specified for general electrical maintenance and workshop use.
Compact digital sound level meter for spot noise checks where a full survey instrument would be more than the job needs.
Lux meter with an integrated dome sensor and rotating head, for lighting design verification and workplace illumination compliance.
Combined temperature and humidity meter with a dual display, for HVAC commissioning, store rooms, server rooms and production areas.
Vane anemometer for air velocity and volume measurement, suited to ventilation balancing and duct commissioning on larger HVAC installations.
Digital insulation resistance tester for routine and acceptance testing of cables, windings and installations, with a digital readout in place of an analogue scale.
Earth resistance tester kit with spikes, leads and carry case, for verifying earth electrode and grounding system resistance during commissioning and audits.
Process calibrator sourcing and measuring 0-100 mV, 0-10 V and 0-24 mA, for commissioning and checking transmitters, controllers and 4-20 mA loops.
Laser distance meter reading up to 60 metres with area and volume functions, for larger surveys, warehouse take-offs and site set-out.
Industrial-grade digital multimeter rated CAT IV 600 V / CAT III 1000 V and ETL listed, for switchboard and distribution work.
True RMS digital multimeter with a large backlit display, aimed at maintenance teams working on drives, UPS systems and electronic loads.
Vane anemometer for air velocity and temperature readings, with the ranges and resolution needed for routine HVAC and ventilation checks.
Compact lux meter with a rotating sensor head, for quick illumination readings during lighting installation and handover checks.
True RMS digital multimeter with a high-contrast display, specified for industrial maintenance where accuracy on distorted waveforms matters.
Digital clamp meter reading AC and DC current without breaking the circuit, with voltage, resistance and continuity ranges via the test leads.
We supply the wider MASTECH range plus other test and measurement brands on request. Send the model number and quantity for a quotation.